Click to return to www.tencon.com home
Tencon Concrete   Tencon Floor System   Tencon Fast Base Foundation System
Overview   Process:
Design		   Process:
Installation		   Process:
Warranty


There are 2 main methods used for installing the Tencon Fast Base Foundation System. Both methods are very similar to those currently used for constructing conventional cast in-situ foundations:

The "In Trench" MethodClick for more detail on the In Trench Method
After piling, trenches for the ground beams are excavated then shuttered. Those trenches are backfilled where necessary and Tencon Concrete is cast in-situ.

Click here to see the "In Trench" Method in more detail

Click here to see the "In Trench" Method in more detail.

 


Fast Base Foundations are installed by house-builders' existing groundwork contractors once given an approved status by Keskin Tencon Ltd.

Please contact us for more information on becoming an installer.

 

 

 

 

Click here to see a video of a
Tencon Fast Base installation in action !!!

The "On Ground" MethodClick for more detail on the On Ground Method
The whole plot is levelled. After piling, reinforced formwork is laid out. Some backfilling around the formwork is usually carried out to provide additional support for the concrete pour. Tencon Concrete is then cast in-situ.

Click here to see the "On Ground" Method in more detail

Click here to see the "On Ground" Method in more detail.
Site Last Updated: 01/03/2008 | Keskin Tencon Ltd, 44 Ingle Head, Fulwood, Preston, PR2 3NS
Tel: 01772 715577 | Company Registration No. 4253762